Choosing a motor grader involves more than comparing horsepower and price. A machine must have enough power to handle the material, sufficient traction to use that power, and the blade control needed to produce the required road profile.
The relationship between specifications matters. A wider moldboard can increase coverage, but it also changes the load on the machine. Attachments can expand working capability while increasing operating weight and transport length. Two graders with similar power ratings may therefore suit different working conditions.
For engineers, contractors, and equipment buyers, understanding motor grader specifications helps turn a technical sheet into a practical purchasing decision.
This guide explains the specifications that deserve the most attention, including engine power, torque, operating weight, grader blade size, transmission, and maneuverability. Using the Sinoreal SRG19-B6 and SRG21-B6 as examples, it also shows how to compare configurations and identify the information you should confirm before requesting a quotation.
1. Engine Power and Torque: Compare Both
Engine power is a useful starting point, but it does not tell the whole story. Torque characteristics, drivetrain performance, and tire grip also influence how a grader works under load.
Understand the power rating
The latest Sinoreal catalog lists:
| Specification | SRG19-B6 | SRG21-B6 |
|---|---|---|
| Gross power | 153 kW at 2,200 rpm | 160 kW at 2,200 rpm |
| Approximate mechanical horsepower | 205 hp | 215 hp |
| Maximum torque | 760 N·m at 1,300–1,500 rpm | 980 N·m at 1,500 rpm |
| Listed maximum traction | 84 kN | 88 kN |
Horsepower figures are rounded conversions using 1 kW ≈ 1.341 mechanical hp.
These are gross power ratings. When comparing another supplier’s grader, check whether its figure represents gross power, net power, or a different rating basis.
Look at torque as well as horsepower
The difference between these models is more pronounced in maximum torque than in gross power. The SRG21-B6 lists 980 N·m, compared with 760 N·m for the SRG19-B6.
This makes torque an important comparison point when evaluating work involving changing material resistance. However, maximum torque alone does not establish a production advantage. Available traction, working speed, blade load, and ground conditions still matter.
What to ask: Request the engine performance information and describe your material, gradients, and typical workload before selecting a model.

2. Operating Weight: Compare the Actual Configuration
Operating weight affects traction potential, machine behavior, and transport planning. The weight shown in a headline specification may describe only the standard configuration.
The latest catalog provides separate weights for different attachment combinations:
| Configuration | SRG19-B6 | SRG21-B6 |
|---|---|---|
| Standard | 15,800 kg | 16,800 kg |
| With front blade | 16,860 kg | 17,860 kg |
| With rear ripper | 17,000 kg | 18,350 kg |
| With front blade and rear ripper | 17,460 kg | 19,000 kg |
For the SRG21-B6, the listed weight increases by 2,200 kg between the standard configuration and the configuration with both attachments.
That difference matters when arranging transport or assessing site access.
Weight distribution also matters
Total weight does not show how much load each axle carries. Driven-wheel loading, tire selection, and surface conditions affect how effectively a grader can transfer engine output to the ground.
A heavier machine may help in demanding conditions, but it can also increase transport requirements or create difficulties on weak ground.
What to ask: Confirm the weight and axle loads of the exact machine being quoted, including attachments, tires, and other options.
3. Grader Blade Size: Match Width to the Work
The moldboard is the grader’s main working tool. Its width affects coverage, while its height, shape, and positioning range influence how material is handled.
The catalog lists the following moldboard dimensions:
| Moldboard specification | SRG19-B6 | SRG21-B6 |
|---|---|---|
| Listed widths | 3,660 / 3,965 mm | 3,965 / 4,270 mm |
| Height | 620 mm | 620 mm |
| Thickness | 20 mm | 20 mm |
| Rotation | 360° | 360° |
| Maximum lifting height | 480 mm | 480 mm |
Confirm which listed width is included in the quotation.
A wider blade does not guarantee higher output
A wider moldboard can increase coverage on an open road. It can also increase the amount of material being moved and the demand placed on the machine.
Effective working width is smaller than full blade length when the moldboard is angled. Pass overlap reduces coverage further.
For narrower roads and restricted sites, a smaller blade may be easier to position. For wider working areas, a larger blade may be useful when power, traction, and material conditions support it.
Check cutting edges separately
The listed 20 mm moldboard thickness should not be confused with cutting-edge thickness.
Ask about replaceable cutting edges, end bits, bolt patterns, and spare-parts availability. These details affect maintenance planning and replacement convenience.
4. Traction: Check How the Figure Is Defined
The catalog lists maximum traction of 84 kN for the SRG19-B6 and 88 kN for the SRG21-B6.
This is useful comparison information, but it should remain labeled as maximum traction. It should not automatically be treated as blade down pressure or as a directly comparable blade-pull value from another manufacturer.
Actual pulling performance depends on factors including:
- Ground condition and moisture.
- Tire specification and wear.
- Axle loading.
- Working speed.
- Blade engagement and material resistance.
Ask how the published figure was established before using it in a cross-brand comparison. A technical-sheet value does not guarantee the same result on loose gravel, wet clay, and compacted road material.
5. Transmission and Working Speeds
Both models are listed with a fixed-axis transmission with electro-hydraulic control, six forward speeds, and three reverse speeds.
| Speed specification | SRG19-B6 | SRG21-B6 |
|---|---|---|
| Forward speed range | 5.5–39.2 km/h | 5.5–39.2 km/h |
| Reverse speed range | 5.3–26.1 km/h | 5.3–26.1 km/h |
| Forward / reverse gears | 6 / 3 | 6 / 3 |
Maximum travel speed helps when moving between work areas. During grading, suitable working speeds and predictable control are more important.
Review the individual gear ratios and how the transmission behaves under load. Listed travel speeds should not be interpreted as guaranteed grading speeds.
What to ask: Explain whether the machine will mainly cut, spread, finish, or maintain roads, and request a demonstration suited to those tasks.
6. Hydraulic Performance and Blade Control
Hydraulics influence how smoothly the operator can position the blade and make corrections while traveling.
The catalog lists working-equipment relief pressures of 18 MPa / 24 MPa for both models. These values should be confirmed against the hydraulic configuration supplied.
Pressure alone does not establish hydraulic responsiveness. Pump displacement, pump speed, circuit design, and control characteristics also matter.
The catalog also lists pump displacement in ml/revolution. This is different from hydraulic flow in liters per minute, so the two should not be compared as equivalent values.
For finishing work, evaluate:
- Fine adjustment of blade height.
- Smooth response during combined movements.
- Ability to hold the blade position.
- Visibility of the cutting edge.
- Ease of making repeated corrections.
If automatic grade control is required, confirm compatibility and the installation scope separately.
7. Steering and Articulation: Consider Working Space

Both models list:
| Maneuverability specification | Listed value |
|---|---|
| Front-wheel steering angle | ±50° |
| Frame articulation angle | ±23° |
| Minimum turning radius | 7,500 mm |
| Front-axle oscillation angle | ±16° |
These specifications help assess work around curves, junctions, and restricted areas.
However, turning radius alone does not describe the complete clearance envelope. Blade position, articulation, and rear attachments affect the space required during a maneuver.
What to ask: Provide your narrowest access width, road layout, and turning restrictions so the proposed configuration can be assessed.
8. Attachments and Dimensions: Plan Beyond the Standard Machine
Both models list optional front blades and rear rippers.
The front blade is listed at 2,740 × 890 mm, with a thickness of 12 mm. The rear ripper’s listed ripping depth differs:
- SRG19-B6: 378 mm.
- SRG21-B6: 425 mm.
These dimensions describe equipment capability and geometry. Achievable penetration still depends on ground resistance and operating conditions.
Attachments change overall length
Both models list these overall lengths:
| Configuration | Overall length |
|---|---|
| Standard | 9,270 mm |
| With rear ripper | 10,620 mm |
| With front blade | 10,380 mm |
| With front blade and rear ripper | 11,140 mm |
The catalog also lists a cab height of 3,400 mm and a width outside the tires of 2,600 mm.
The outside-tire width is smaller than the listed moldboard widths. Transport planning must therefore consider blade positioning or removal, attachments, and the final shipping arrangement.
Request a transport drawing for the machine being supplied.
9. Fuel Consumption: Read the Unit Correctly
Both models list rated fuel consumption of 223 g/kW·h.
This is a specific fuel-consumption figure: fuel mass relative to power output over time under the stated rating conditions. It is not liters per hour.
Actual hourly consumption changes with engine load, working speed, material, idling, terrain, and operator technique. The listed figure alone cannot establish a reliable hourly fuel budget.
Both models also list a 360 L fuel tank, but tank capacity does not establish working hours between refueling.
For cost planning, request consumption information from a clearly described duty cycle that resembles your project.
SRG19-B6 or SRG21-B6: Which Should You Evaluate?
The specifications give you a basis for shortlisting.
The SRG19-B6 combines 153 kW gross power, 760 N·m maximum torque, and a standard operating weight of 15,800 kg. Its listed moldboard widths are 3,660 and 3,965 mm.
The SRG21-B6 provides 160 kW gross power, 980 N·m maximum torque, and a standard operating weight of 16,800 kg. Its listed moldboard widths extend to 4,270 mm, and its optional ripper has a greater listed ripping depth.
Evaluate the SRG19-B6 where its blade choices, weight, and performance meet the workload. Evaluate the SRG21-B6 where the additional torque, weight, or wider moldboard is relevant.
The final choice should follow working conditions and configuration requirements. These figures alone do not establish production rates or finishing accuracy.
Frequently Asked Questions
What motor grader specifications matter most?
Start with power and torque, operating weight, traction, moldboard dimensions, and working speeds. Then assess hydraulic control, maneuverability, attachments, and service requirements.
What is the main difference between SRG19-B6 and SRG21-B6?
The SRG21-B6 lists higher gross power, maximum torque, maximum traction, and standard operating weight. It also lists a wider maximum moldboard option and a greater optional ripper depth.
Does a wider grader blade always improve productivity?
A wider blade can improve coverage when conditions allow. Its benefit depends on available traction and power, material load, blade angle, overlap, and working space.
Does 223 g/kW·h tell me hourly fuel consumption?
No. It is a specific fuel-consumption rating. Estimating liters per hour requires additional information about engine output, operating conditions, and fuel density.
Which operating weight should I use for planning?
Use the weight of the actual configuration being purchased. Confirm attachments and the supplier’s weight definition before arranging transport or evaluating site access.
Motor Grader Specification Details
The right grader combines suitable power, traction, blade capability, and control for the work ahead.
Contact Sinoreal Machinery for detailed SRG19-B6 and SRG21-B6 specifications and a configuration recommendation. Share your material conditions, road width, workload, destination, and attachment requirements to request a quotation suited to your project.


